16
i AUTO-X
How to use
Auto OFF/ON button
Use when remote control is misplaced or a malfunction occurs. Raise the front panel:
• To use in i AUTO-X mode, press the button once.
• To use in COOL mode, press and hold the button until 1 beep is heard, then
release.
• Press the button again to turn off.
CLOCK
MODE
AIR CONDITIONER
OFF/ON
SET CHECK RESET
AC
RC
ON
OFF
SET
CANCEL
123
TIMER
ECONAVI
NANOE-G
AUTO
COMFORT
QUIET
MODE
TEMP
FAN SPEED
AIR SWING
i AUTO-X
iAUTO-X
CL
C
FF/
HE
FF
ET
AN
E
Remote control display
Press and hold for
approximately
10 seconds to show
temperature setting in
°C or °F.
Press to restore the
remote control to
default setting.
Not used in normal
operations.
Human activity
sensor
Sunlight sensor
and remote
control receiver
Indicator
POWER
TIMER
i AUTO-X
NANOE-G
AUTO COMFORT
QUIET
(Green)
(Green)
(Orange)
(Orange)
(Blue)
(Green)
(Orange)
i AUTO-X
To reach temperature quickly
i AUTO-X
• The unit controls set temperature according to
room temperature to accelerate room cooling.
Set
temperature
i AUTO-X
-1°C
Max = 4 hours
• After max 4 hours, the set temperature is
shifted according to AUTO COMFORT activity
detection.
• Fan speed is fi xed at AUTO, fan speed
selection is prohibited.
• During unit is off, press
i AUTO-X
will turn on the
unit with i AUTO-X mode.
• i AUTO-X mode can be cancelled by pressing
the respective button again.
MODE
To select operation mode
i AUTO-X - To reach temperature quickly
COOL - To enjoy cool air
DRY - To dehumidify the environment
AUTO
COMFORT
To maximise comfort
AUTO COMFORT
QUIET
To enjoy quiet operation
QUIET
• This operation reduces airfl ow noise.
FAN SPEED
To select fan speed
(Remote control display)
•
For AUTO, the indoor fan speed is automatically
adjusted according to the operation mode.
•
If i AUTO-X mode is set, fan speed is fi xed to
AUTO. To adjust fan speed, cancel i AUTO-X
mode.
F569797_YA0115-0.indb 16F569797_YA0115-0.indb 16 21/1/2015 10:24:10 AM21/1/2015 10:24:10 AM
To Next Page
Loading...
