113
o nanoe™ X Discharge Abnormality
Abnormal detection condition
After 30 minutes nanoe™ X power ON, abnormal signal is being detected continuously for 5s.
Action after abnormal detection condition fulfilled
Abnormal discharge counter +1, nanoe™ X power OFF for 30 minutes and then restart. When
abnormal discharge counter ≥ 12, abnormal code: H67 in analyze area (Area where abnormal code
not displayed) will be memorized.
Abnormal discharge counters clear condition
Discharge counter will be cleared when operation become normal for 50 mins above or when
operations stop.
14.13 Wireless LAN Control
14.13.1 System Overview
Requires the APP to work with a smartphone with Android 4.4 and above, or iOS 9 and above.
However, there is no guarantee that the APP will work well with all Android OS version.
The Network Adaptor is designed specifically as a terminal for Panasonic Comfort Cloud app.
The Wireless LAN network coverage must reach the air conditioner installation location.
Specification
Network Adaptor Wireless LAN Module (built-in)
Model DNSK-P11
Input Voltage DC 5V (From Air Conditioner Indoor Unit)
Current Consumption Tx/Rx max. 290/100 mA
Wireless LAN standard IEEE 802.11 b/g/n
Frequency range 2.4 GHz band
Encryption WPA2-PSK (TKIP/AES)
Precaution
Do NOT disassemble or alter this Network Adaptor in any way.
Do NOT remove this Network Adaptor from the appliance product’s during operations.
Data transmitted and received over radio waves may be intercepted and monitored.
Usage precautions
Before using this product, be sure to read all the precautions in this manual for proper use. The Company is not
liable for any defects and damages, unless legal liability is recognized, in regards to failures, incurred by use of
this product that occur through incorrect use or during use by yourself or a third party.
Security Measure
Wireless LAN uses radio waves to exchange information. Therefore, there is a risk of unauthorized access.
Initialize the APP settings on the product prior to disposal or transferring to a third party.
Before setting
Confirm the wireless router is connected to the network correctly.
Confirm the Wireless LAN of the smartphone is activated.
Smartphone and air conditioner should be connected to the same wireless router.
Download from app store
Router
Internet
Smartphone
Items you need to prepare
(purchase and subscribe separately)
Panasonic Comfort Cloud
app (free)
Indoor Unit
Network
Adaptor
To Next Page
Loading...
