169
19. Disassembly and Assembly Instructions
WARNING
High Voltage is generated in the electrical parts area by the capacitor. Ensure that the capacitor has discharged sufficiently before proceeding
with repair work. Failure to heed this caution may result in electric shocks.
19.1 CS-TZ20ZKEW CS-TZ25ZKEW CS-TZ35ZKEW CS-TZ42ZKEW
CS-TZ50ZKEW CS-RZ25ZKEW CS-RZ35ZKEW CS-RZ50ZKEW
19.1.1 Indoor Electronic Controllers, Cross Flow Fan and Indoor Fan Motor Removal
Procedures
19.1.1.1 To Remove Front Grille
Figure 1
19.1.1.2 To Remove Electronic Controller
Figure 2
3. Slide the 3 lock knobs on the upside of the
Front Grille to unlock position.
4. Hold both sides of the Front Grille
and remove it by pulling up and
toward yourself gently.
1. Lift to open the horizontal vane gently.
2. Remove the 3 screws on the Front Grille.
5 Hooks
5. Removing 2 pieces of the Control Board Cover
by releasing the 5 hooks.
To Next Page
Loading...
