Cooling Operation Time Diagram
Quiet Operation Control
(For Cooling Mode or cooling region of Soft Dry Mode)
•
• •
•
Purpose of this operation is to provide quite cooling operation compare to normal operation.
•
• •
•
When the Quiet Mode is set at the remote control, Quiet Mode LED illuminates, the sound level will be automatically decreased
3 dB, against the present sound level operation.
•
• •
•
Quiet setting of fan speed rpm refer to Indoor Fan Speed Control.
•
• •
•
Dew formation become severe at Quiet Lo cool, therefore:
i) For Transistor Motor
Quiet Lo Cool is operated only 1h 30 minute (1h QLo, 30 min QLo+100). After that, it goes back to QLo+180 rpm. (However
quiet LED remains on).
ii) For Induction Motor
Quiet Lo Cool is operated only 1h 30 minute (1h QLo, 30 min QLo+80). After that, it goes back to QLo+170 rpm. (However quiet
LED remains on).
18
CS-V18CKE CU-V18CKE / CS-V24CKE CU-V24CKE
To Next Page
Loading...
Need help?
General
