20
Cleaning instructions
To ensure optimal performance of the unit, cleaning has to be carried out at regular
intervals. Dirty unit may cause malfunction and you may see error code “H 99”.
Please consult authorised dealer.
• Switch off the power supply and unplug before cleaning.
• Do not touch the aluminium fi n, sharp parts may cause injury.
• Do not use benzine, thinner or scouring powder.
• Use only soap (
pH 7) or neutral household detergent.
• Do not use water hotter than 40 °C / 104 °F.
Indoor unit
Wipe the unit gently with a soft,
dry cloth.
Coils and fans should be clean
for at least every 6 months by
authorised dealer.
Outdoor unit
Clean debris that surround the
unit.
Clear any blockage from the
drain pipe.
Air fi lters
Once every 2 weeks
• Wash/rinse the fi lters gently
with water to avoid damage to
the fi lter surface.
• Dry the fi lters thoroughly under shade,
away from fi re or direct sunlight.
• Replace any damaged fi lters.
1
Remove the front
panel
1
Attach air fi lter
2
Remove air fi lter
2
Attach the front
panel
Front panel
Remove the front panel
1
Push in the tab on both sides of the
front panel.
Open the front panel.
3
Unhook the string.
4
Lift up the front panel to remove it.
• Wipe front appearance with a soft dry
cloth.
5
Install the front panel by following the
removal procedure in reverse.
3
1
1
4
4
2
2
2
Indoor unit
Aluminium fi n
Air fi lters
Front panel
String
ACXF55-19350.indb 20ACXF55-19350.indb 20 1/29/2018 8:30:03 AM1/29/2018 8:30:03 AM
To Next Page
Loading...
Need help?
General
