4
Initialization
Please initiate the Remote Control by selecting the language of operation and set the date
and time accordingly before setting up the operation menu preferences.
During fi rst power ON, Remote Controller will automatically prompt setting screen as default.
It can also be access from Personal Setup in the Main Menu.
Blinking
12:00,Mon
Initialization
Initializing
12:00,Mon
Default data
EEPROM setup
12:00,Mon
Start
12:00,Mon
Language
Select Confirm
ENGLISH
ESPAÑOL
ITALIANO
NEDERLANDS
12:00,Mon
Clock format
Select Confirm
24h
am/pm
12:00,Mon
Date & Time
Year/Month/Day Hour : Min
12 : 00 pm
/ 01 / 01
Select Confirm
2021
12:00,Mon
Set temp. unit
Select Confirm
˚C
˚F
12:00,Mon
Heat mode
Select Confirm
Enable
Disable
12:00,Mon
Start
Selecting the language
Wait while the display is initializing.
When initializing screen ends, it turns to
normal screen.
When any button is pressed, language setting
screen appears.
1
Scroll with
and to select the language.
2
Press
to confi rm the selection.
Setting the clock
1
Select with
or to display the time, either
24h or am/pm format (for example, 15:00 or
3:00 pm).
2
Press
to confi rm the selection.
3
Use
and to select year, month, day, hour
and minutes. (Select and move with and
press to confi rm.)
4
Once the time is set, time and day will appear
on the display even if the Remote Controller is
turned OFF.
Setting the temperature unit
1
Scroll with
and to select the unit.
Selecting the Heat mode
1
Scroll with
and to select Enable or
Disable.
ACXF55-32681.indb 4ACXF55-32681.indb 4 1/20/2022 6:14:40 PM1/20/2022 6:14:40 PM
To Next Page
Loading...
Need help?
General
