Panasonic CT-27D10B - Serviceman Mode Adjustments: Options

- 18 -
Press the Power Button on the Remote Control to select the Serviceman Adjustment
For
Adjustments:
1.Press Channel Up/Down on the
Remote Control to select one of
the available Service Adjustments
(a in Fig. 14).
Note: Write Down the original
value set (b in Fig. 14) for
each address before
modifying anything. It is
easy to erroneously adjust
the wrong item.
2.Press Volume Up/Down on th
e
Remote Control to adjust th
e
level of the selected Servic
e
Adjustment (b in Fig. 14).
OPTIONS Adjustment
Default
Level
S0 ABL GAIN 3
S1 ABL POINT 3
S2 RGB BRIGHTNESS 8
S3 RGB GAMMA 1
S4 COLOR GAMMA 1
S5 VSM-G 0
S6 BS POINT 7
S7 CLOCK ADJUST 128
S8 LOUD COMP 31
S9 CAPTION DIG FILTER SW 0
SA CAPTION SCROLL 1
SB RGB MATRIX 6
SC RGB MATRIX COMP 5
IMPORTANT NOTE:
Always Exit the Serviceman
Mode Following Adjustments.
Note: Some adjustments modes may not be
available in some models depending
on available options.
PW
To X Items.
CH
CH
CH