Panasonic CT-27D10B - Serviceman Mode Adjustments: Comb Filter; Comb Filter Adjustment Details

- 19 -
Press the Power Button on the Remote Control to select the Serviceman Adjustment
For Adjustments:
Comb Filter Adjustment
Default
Level
X0 CLIP LEVEL 152
X1 CSOK 12
X2 COMB LIMIT 24
X3 COMB CORE 41
X4 COMB RF DELAY 20
X5 COMB VIDEO DELAY 18
X6 COMB VMLM 90
X7 COMB VMCO 24
X8 COMB SHARP 123
X9 COMB VM LEVEL 255
XA COMB VMPKF 1
XB H LOCK MODE 1
XC H LOCK 70
XD H SEP 1 313
XE H SEP 2 266
XF SUB H LOCK MODE 0
X10 SUB H LOCK 70
X11 SUB H SEP1 313
X12 SUB H SEP2 266
1.Press Channel Up/Down on the
Remote Control to select one of
the available Service Adjustments
(a in Fig. 14).
Note: Write Down the original
value set (b in Fig. 14) for
each address before
modifying anything. It is
easy to erroneously adjust
the wrong item.
2.Press Volume Up/Down on the
Remote Control to adjust the
level of the selected Service
Adjustment (b in Fig. 14).
IMPORTANT NOTE:
Always Exit the Serviceman
Mode Following Adjustments.
Note: Some adjustments modes may not be
available in some models depending
on available options.
CH
PW
To B It em s.
CH
CH