To Next PageTo Next PageHow to improve HEAT/COOL efficiency in Panasonic CU-2TZ50TBE?
If your Panasonic Air Conditioner isn't operating efficiently in HEAT/COOL mode, ensure that you set the temperature correctly, close all doors and windows, clean or replace the filters, and clear any obstructions at the air inlet and outlet vents.
Why does my Panasonic CU-2TZ50TBE Air Conditioner outdoor unit emit water or steam?
The outdoor unit emits water or steam because condensation or evaporation occurs on the pipes.
Why is the TIMER indicator always on in my Panasonic CU-2TZ50TBE Air Conditioner?
The TIMER indicator is always on because the timer setting repeats daily once set.
How to improve HEAT/COOL mode efficiency in Panasonic Air Conditioner?
If your Panasonic Air Conditioner isn't working efficiently in HEAT/COOL mode, ensure the temperature is set correctly, all doors and windows are closed, the filters are clean or replaced, and there are no obstructions at the air inlet and outlet vents.
What to do if my Panasonic CU-2TZ50TBE Air Conditioner doesn't receive the remote control signal?
If the Panasonic Air Conditioner unit does not receive the signal from the remote control, ensure that the receiver is not obstructed. Note that certain fluorescent lights may interfere with the signal transmitter; consult an authorised dealer.
Why does Panasonic CU-2TZ50TBE POWER indicator blink before the unit is switched on?
If the POWER indicator on your Panasonic Air Conditioner blinks before the unit is switched on, this indicates a preliminary step in preparation for operation when the ON timer has been set. When ON Timer is set, the unit may start earlier (up to 35 minutes) before the actual set time in order to achieve the desired temperature on time.
Why does my Panasonic CU-2TZ50TBE outdoor unit emit water/steam?
If the outdoor unit of your Panasonic Air Conditioner emits water or steam, it is due to condensation or evaporation occurring on the pipes.
Why is the TIMER indicator always on on my Panasonic CU-2TZ50TBE?
If the TIMER indicator on your Panasonic Air Conditioner is always on, it means the timer setting repeats daily once set.
What to do if Panasonic Air Conditioner remote control does not work?
If the remote control for your Panasonic Air Conditioner isn't working, first ensure that the batteries are inserted correctly. If the display is dim or the transmission signal is weak, try replacing the batteries.
Why does my Panasonic CU-2TZ50TBE Air Conditioner's outdoor unit emit water or steam?
The water or steam emitted from the outdoor unit of your Panasonic Air Conditioner is due to condensation or evaporation occurring on the pipes.
General| Cooling Capacity | 5.0 kW |
|---|---|
| Power Supply | 220-240 V, 50 Hz |
| Refrigerant | R32 |
| Indoor Unit Weight | 10 kg |
| Outdoor Unit Dimensions (W x H x D) | 780 x 540 x 289 mm |
Guide to install batteries in the remote control.
Instructions to set the clock on the remote control.
How to turn the air conditioner ON/OFF using the remote.
How to choose operation modes like AUTO, HEAT, COOL, DRY.
How to adjust the target temperature using the remote control.
Safety measures for using R32 flammable refrigerant.
Qualifications and duties of service personnel.
Safety checks and practices before and during work.
Procedures for safe refrigerant removal and evacuation.
Safe practices for charging refrigerant systems.
Steps for safely decommissioning the unit.
Guidelines for safe refrigerant recovery and cylinder handling.
