To Next PageTo Next PageWhy is Panasonic CU-2TZ50TBE operation delayed a few minutes after restarting?
If your Panasonic Air Conditioner operation is delayed a few minutes after restarting, this delay is a protection mechanism for the unit’s compressor.
What does it mean when Panasonic CU-2TZ50TBE POWER indicator blinks during HEAT mode?
If the POWER indicator on your Panasonic Air Conditioner blinks during HEAT mode with no warm air supply and the flap is closed, the unit is in defrost mode, and AIR SWING is set to AUTO.
General| Cooling Capacity | 5.0 kW |
|---|---|
| Power Supply | 220-240 V, 50 Hz |
| Refrigerant | R32 |
| Indoor Unit Weight | 10 kg |
| Outdoor Unit Dimensions (W x H x D) | 780 x 540 x 289 mm |
Guide to install batteries in the remote control.
Instructions to set the clock on the remote control.
How to turn the air conditioner ON/OFF using the remote.
How to choose operation modes like AUTO, HEAT, COOL, DRY.
How to adjust the target temperature using the remote control.
Safety measures for using R32 flammable refrigerant.
Qualifications and duties of service personnel.
Safety checks and practices before and during work.
Procedures for safe refrigerant removal and evacuation.
Safe practices for charging refrigerant systems.
Steps for safely decommissioning the unit.
Guidelines for safe refrigerant recovery and cylinder handling.
