To Next PageTo Next PageWhat to do if my Panasonic CU-2TZ50TBE Air Conditioner's HEAT/COOL mode isn't working efficiently?
If your Panasonic Air Conditioner isn't heating or cooling efficiently, make sure that you set the temperature correctly, close all doors and windows, clean or replace the filters, and clear any obstructions at the air inlet and outlet vents. Also, check if the circuit breaker has tripped or if any timers have been set.
Why my Panasonic CU-2TZ50TBE Air Conditioner makes water flowing sound?
If you hear a water flowing sound during the operation of your Panasonic Air Conditioner, it is due to the flow of refrigerant inside the unit.
Why POWER indicator blinks during HEAT mode on Panasonic CU-2TZ50TBE Air Conditioner?
If the POWER indicator on your Panasonic Air Conditioner blinks during HEAT mode and there's no warm air, with the flap closed, it means the unit is in defrost mode and AIR SWING is set to AUTO.
What to do if Panasonic CU-2TZ50TBE Air Conditioner unit does not work?
If your Panasonic Air Conditioner unit isn't working, check if the circuit breaker has tripped. Also, verify whether any timers have been set.
Why does mist emerge from my Panasonic CU-2TZ50TBE Air Conditioner?
If you see mist emerging from the indoor unit of your Panasonic Air Conditioner, it is a condensation effect due to the cooling process.
Why is my Panasonic CU-2TZ50TBE Air Conditioner making a cracking sound during operation?
The cracking sound during operation is caused by changes in temperature that lead to the expansion and contraction of the unit's components.
Why does the POWER indicator blink on my Panasonic CU-2TZ50TBE Air Conditioner before it turns on?
The POWER indicator on your Panasonic Air Conditioner might blink before the unit is switched on as a preliminary step in preparation for operation when the ON timer has been set. When the ON Timer is set, the unit may start earlier (up to 35 minutes) before the actual set time in order to achieve the desired temperature on time.
Why is the cooling/heating capacity reduced on my Panasonic Air Conditioner at the lowest fan speed?
If you've noticed a reduction in cooling/heating capacity during the lowest fan speed setting on your Panasonic Air Conditioner, it's because the low fan speed prioritizes low noise operation, which can reduce cooling/heating capacity. To increase capacity, increase the fan speed.
Why Panasonic Air Conditioner unit doesn't receive signal from remote control?
If your Panasonic Air Conditioner unit isn't receiving the signal from the remote control, ensure that the receiver is not obstructed. Note that certain fluorescent lights may interfere with the signal transmitter; consult an authorized dealer for assistance.
How to reduce noise during Panasonic Air Conditioner operation?
If your Panasonic Air Conditioner is noisy during operation, check whether the unit has been installed at an incline and ensure that the front panel is properly closed.
General| Cooling Capacity | 5.0 kW |
|---|---|
| Power Supply | 220-240 V, 50 Hz |
| Refrigerant | R32 |
| Indoor Unit Weight | 10 kg |
| Outdoor Unit Dimensions (W x H x D) | 780 x 540 x 289 mm |
Guide to install batteries in the remote control.
Instructions to set the clock on the remote control.
How to turn the air conditioner ON/OFF using the remote.
How to choose operation modes like AUTO, HEAT, COOL, DRY.
How to adjust the target temperature using the remote control.
Safety measures for using R32 flammable refrigerant.
Qualifications and duties of service personnel.
Safety checks and practices before and during work.
Procedures for safe refrigerant removal and evacuation.
Safe practices for charging refrigerant systems.
Steps for safely decommissioning the unit.
Guidelines for safe refrigerant recovery and cylinder handling.
