Why my Panasonic CU-3RE18SBE Air Conditioner makes water flowing sound?
If you hear a water flowing sound during the operation of your Panasonic Air Conditioner, it is due to the flow of refrigerant inside the unit.
Why POWER indicator blinks during HEAT mode on Panasonic CU-3RE18SBE?
If the POWER indicator on your Panasonic Air Conditioner blinks during HEAT mode and there's no warm air, with the flap closed, it means the unit is in defrost mode and AIR SWING is set to AUTO.
What to do if Panasonic CU-3RE18SBE Air Conditioner unit does not work?
If your Panasonic Air Conditioner unit does not work, check if the circuit breaker is tripped and verify that timers have not been set.
Why does my Panasonic CU-3RE18SBE outdoor unit emit water or steam?
The water or steam emitted from the outdoor unit of your Panasonic Air Conditioner is due to condensation or evaporation occurring on the pipes.
Why is the TIMER indicator always on in my Panasonic CU-3RE18SBE Air Conditioner?
The TIMER indicator on your Panasonic Air Conditioner remains on because the timer setting repeats daily once it has been set.
How to reduce noise during Panasonic CU-3RE18SBE Air Conditioner operation?
If your Panasonic Air Conditioner is noisy during operation, check whether the unit has been installed at an incline and ensure that the front panel is properly closed.
Why does airflow continue after my Panasonic CU-3RE18SBE has stopped?
Airflow continues even after operation has stopped because of the extraction of remaining heat from the indoor unit, which can take up to 30 seconds.
Why does the indoor fan stop sometimes on my Panasonic CU-3RE18SBE?
The indoor fan stops occasionally during automatic fan speed setting to help remove surrounding odors.
Why does my room smell peculiar when using Panasonic CU-3RE18SBE Air Conditioner?
The room may have a peculiar odor because of a damp smell emitted by the wall, carpet, furniture, or clothing.
What causes the water flowing sound in Panasonic CU-3RE18SBE during operation?
The water flowing sound during operation is due to the refrigerant flow inside the unit.
Instructions on selecting modes, starting/stopping, and adjusting temperature.
Guidelines for safe handling and installation of indoor and outdoor units.
Prohibitions and compulsory actions to prevent hazards like injury or electric shock.
Guidelines for safe use of power supply, cords, and plugs.
Hazards associated with R32 refrigerant and precautions to avoid ignition risks.
Safety requirements for installing and operating the unit in rooms, ventilation, and avoiding ignition sources.
Special considerations and precautions when using R32 refrigerant, including installation tools and piping.
Guidelines for installing the unit in suitable spaces, pipework, and compliance with regulations.
Requirements for trained and certified personnel performing servicing and maintenance.
Safety checks and procedures for working on systems with flammable refrigerants to minimize ignition risks.
Methods and equipment for checking refrigerant presence and handling leaks.
Prohibiting ignition sources when working with flammable refrigerants.
Safety procedures for repairing sealed components, including disconnecting power and leak detection.
Methods for detecting flammable refrigerants without using ignition sources.
Acceptable methods for detecting leaks in refrigerant systems, including equipment and fluids.
Procedures for removing and evacuating refrigerant from the system for repairs or decommissioning.
Requirements for charging refrigerant, including contamination prevention and electrostatic discharge.
Steps for safely decommissioning the unit, including refrigerant recovery and electrical isolation.
General| Cooling Capacity (BTU) | 18000 |
|---|---|
| Refrigerant | R32 |
| Inverter | Yes |
| Cooling Capacity (kW) | 5.3 |
| Power Supply | 220-240V, 50Hz |
| Type | Split System |
| Noise Level (Outdoor Unit) | 50 dB |
To Next Page
