Why does Panasonic CU-4Z80TBE indoor fan stop during automatic fan speed setting?
The indoor fan of your Panasonic Air Conditioner might stop occasionally during automatic fan speed setting to help remove the surrounding odour.
What to do if Panasonic Air Conditioner unit does not work?
If your Panasonic Air Conditioner unit isn't working, check if the circuit breaker has tripped. Also, verify whether any timers have been set.
Why does my Panasonic CU-4Z80TBE have a peculiar odour?
The peculiar odor from your Panasonic Air Conditioner may be due to a damp smell emitted by the wall, carpet, furniture, or clothing.
Why is my Panasonic CU-4Z80TBE making a cracking sound during operation?
The cracking sound during operation is caused by changes in temperature that lead to the expansion and contraction of the unit's components.
Why indoor fan stops during heating in Panasonic CU-4Z80TBE?
If the indoor fan stops occasionally during heating operation of your Panasonic Air Conditioner, it is to avoid unintended cooling effect.
How to improve the efficiency of HEAT/COOL mode on my Panasonic CU-4Z80TBE?
If your Panasonic Air Conditioner isn't operating efficiently in HEAT/COOL mode, make sure you've set the temperature correctly. Close all doors and windows, clean or replace the filters, and clear any obstructions at the air inlet and outlet vents.
Why my Panasonic Air Conditioner makes cracking sound?
A cracking sound during operation of your Panasonic Air Conditioner is due to temperature changes causing the expansion or contraction of the unit.
Why does the Panasonic Air Conditioner POWER indicator blink and stop in COOL/DRY mode?
If the POWER indicator blinks and stops when operating in COOL/DRY mode, it indicates that the system has locked to operate in HEAT mode only.
Why POWER indicator blinks in HEAT mode of Panasonic Air Conditioner?
The POWER indicator blinks during HEAT mode with no warm air supply (and flap is closed) because the unit is in defrost mode (and AIR SWING is set to AUTO).
Why does my Panasonic CU-4Z80TBE Air Conditioner outdoor unit emit water/steam?
If the outdoor unit of your Panasonic Air Conditioner emits water or steam, it is due to condensation or evaporation occurring on the pipes.
Guide to install batteries in the remote control and set the clock.
How to start/stop, select modes, and set temperature using the remote.
Explains symbols for hazards, warnings, and compulsory actions for unit safety.
Guidelines for safe use of power cords, plugs, and avoiding electrical shock.
Information on hazards associated with R32 refrigerant and fire risks.
Requirements for trained personnel and safety protocols during work.
Details on the Network Adaptor's specifications and radio frequency compliance.
How to set airflow direction, fan speed, and use special functions.
Guide to sleep mode operation and setting ON/OFF timers.
Steps for app installation, Wi-Fi connection, and device registration.
Lists common symptoms, their causes, and pre-service checks.
Instructions on how to check the unit for error codes using the remote control.
Guidelines for recycling and disposing of old electrical products and batteries.
Details on the firmware update function and software licenses.
General| Cooling Capacity | 8.0 kW |
|---|---|
| Heating Capacity | 9.0 kW |
| Power Supply | 220-240 V, 50 Hz |
| Refrigerant | R32 |
| Type | Multi Split |
| Indoor Unit Dimensions (W x H x D) | Varies depending on the connected indoor units |
| Indoor Unit Weight | Varies depending on the connected indoor units |
| Noise Level (Indoor) | Varies depending on the connected indoor units |
To Next Page
