To Next PageTo Next PageWhy is my Panasonic Air Conditioner noisy during operation?
If your Panasonic Air Conditioner is noisy during operation, check whether the unit has been installed at an incline. Also, make sure that the front panel is closed properly.
Why does Panasonic CU-4Z80TBE POWER indicator blink before the unit is switched on?
If the POWER indicator on your Panasonic Air Conditioner blinks before the unit is switched on, this indicates a preliminary step in preparation for operation when the ON timer has been set. When ON Timer is set, the unit may start earlier (up to 35 minutes) before the actual set time in order to achieve the desired temperature on time.
What does it mean when Panasonic Air Conditioner POWER indicator blinks during HEAT mode?
If the POWER indicator on your Panasonic Air Conditioner blinks during HEAT mode with no warm air supply and the flap is closed, the unit is in defrost mode, and AIR SWING is set to AUTO.
Why is Panasonic CU-4Z80TBE operation delayed a few minutes after restarting?
If your Panasonic Air Conditioner operation is delayed a few minutes after restarting, this delay is a protection mechanism for the unit’s compressor.
Why does Panasonic Air Conditioner indoor fan stop during heating?
The indoor fan of your Panasonic Air Conditioner might stop occasionally during heating operation to avoid unintended cooling effect.
Why does Panasonic CU-4Z80TBE indoor fan stop during automatic fan speed setting?
The indoor fan of your Panasonic Air Conditioner might stop occasionally during automatic fan speed setting to help remove the surrounding odour.
Why does airflow continue after Panasonic CU-4Z80TBE Air Conditioner has stopped?
If airflow continues from your Panasonic Air Conditioner even after operation has stopped, this is due to the extraction of remaining heat from the indoor unit, which takes a maximum of 30 seconds.
Why does my room have a peculiar odour when using Panasonic Air Conditioner?
If the room has a peculiar odour when your Panasonic Air Conditioner is running, this may be due to damp smell emitted by the wall, carpet, furniture or clothing.
Why is my Panasonic Air Conditioner making a cracking sound?
If you hear a cracking sound during the operation of your Panasonic Air Conditioner, it is due to temperature changes causing the expansion or contraction of the unit.
General| Cooling Capacity | 8.0 kW |
|---|---|
| Heating Capacity | 9.0 kW |
| Power Supply | 220-240 V, 50 Hz |
| Refrigerant | R32 |
| Type | Multi Split |
| Indoor Unit Dimensions (W x H x D) | Varies depending on the connected indoor units |
| Indoor Unit Weight | Varies depending on the connected indoor units |
| Noise Level (Indoor) | Varies depending on the connected indoor units |
Guide to install batteries in the remote control and set the clock.
How to start/stop, select modes, and set temperature using the remote.
Explains symbols for hazards, warnings, and compulsory actions for unit safety.
Guidelines for safe use of power cords, plugs, and avoiding electrical shock.
Information on hazards associated with R32 refrigerant and fire risks.
Requirements for trained personnel and safety protocols during work.
Details on the Network Adaptor's specifications and radio frequency compliance.
How to set airflow direction, fan speed, and use special functions.
Guide to sleep mode operation and setting ON/OFF timers.
Steps for app installation, Wi-Fi connection, and device registration.
Lists common symptoms, their causes, and pre-service checks.
Instructions on how to check the unit for error codes using the remote control.
Guidelines for recycling and disposing of old electrical products and batteries.
Details on the firmware update function and software licenses.
