Panasonic CU-M1403KE - Page 8

HSITONS
Open
the
door
and
Press
the
Time
button
Press
(the
Clock)
press
(the
Clock)
to
set
the
hours
and
button,
and
then
close
"
button.
minutes.
the
remote
control
door.
¢
After
the
batteries
have
been
Press
the
!=!
button
to
ad-
The
letters
or
AM
or
PM
will
light
inserted:
vance
the
time,
and
press
the
up
and
setting
of
the
current
time
PM
“12:00”
will
blink
in
the
button
to
go
back.
will
be
completed.
display.
(The
letters
of
AM
or
PM
will
When changing
the
time:
blink.)
The
letters
of
AM
or
PM will
blink.
(Caution
e The timer uses the current time as a reference.
If the time is not set correctly, correct timer setting will not be possible.
e When the timer is set
The current time display will be cleared.
e About the Remote Control [BA] switch
* This switch is used when two air conditioner units have
been installed in the one room.
¢ Signals cannot be transmitted when the switch is set to
“B,” so always set this switch to “A”.
¢ |f two air conditioners have been installed in the one
room, please consult with your dealer.