8.3. Economy Operation
- Purpose of this operation is for electricity cost saving.
- When Economy button is pressed, target temperature is shifted up
1°F, this will reduce operating time of the compressor and
therefore reduce power consumption. It may, however, take a little
longer for the compressor to cycle on and thereby increase the
room temperature slightly.
- Compressor stops when the room temperature reaches the target
temperature. It turns on again when the room temperature rises.
- This operation automatically will be running under Low Fan Speed.
- Economy operation will stop if:-
- Economy button/Pad is pressed again.
- Stopped by ON/OFF operation.
- Timer OFF activates.
12
To Next Page
Loading...
