16
CY-VMC7000U
7
E
N
G
L
I
S
H
Disc Insert
Playback starts automatically.
Notes :
¡Load a CD after making sure that there is no CD
in the disc compartment. (If "NO DISC" is dis-
played while the CD mode is activated, you will
find there is no CD in the compartment.)
¡Loading a CD when the power is off will turn
the power on.
Track Selection
[[] (TRACK) : Next track
[]] (TRACK) : Beginning of the current track
Previous track (Press twice.)
Track Search
Press and hold.
[[] (TRACK) : Fast forward
[]] (TRACK) : Fast backward
CD Player
Label Side
Disc Eject
Press [u] to stop playback and eject the CD.
Cautions:
¡Do not use irregularly shaped CDs.
¡Do not insert foreign matter into the disc slots.
[MODE]
[]][[] (TRACK)
Notes :
¡You can play a CD even if the monitor is closed.
¡If you leave a CD at the CD slot for approximately 30 seconds, the CD is loaded into the compartment automatically
after loud beep is energized three times.
Track Number
Play Time
Mode Display
Number of Track
The monitor shows
“Over B” when the
number of tracks is
21 or more.
[u] (Eject)
When CD is in the player
Press [MODE] to change to CD player mode and
playback starts.