EasyManua.ls Logo

Panasonic CY-VMC7000U - Specifications

Panasonic CY-VMC7000U
52 pages
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
55
CY-VMC7000U
46
E
N
G
L
I
S
H
Specifications
General
Power Supply : DC 12 V (11 V - 16 V), test voltage 14.4 V, negative ground
Current Consumption : Less than 1.5 A
Maximum Power Output (External Speaker)
: 0.7 W
Compatible Speaker Impedance : 8
Video Input Signal : Composite video signal, 1.0 Vp-p (75 )
Audio Input Sensitivity : 1.8 Vrms
Video Output Signal : Composite video signal, 1.0 Vp-p (75 )
Pre-Amp Output Voltage : 1.8 Vrms (CD)
Pre-Amp Output Impedance : Less than 600
Dimensions (W x H x D)
Display Unit : 7” x 1-15/16” x 6-15/16” (178 x 50 x 160 mm)
Control Unit : 6” x 13/16” x 5-7/8” (153 x 21 x 150 mm)
Weight
Display Unit : 5 lbs. 1 oz. (2.3 kg)
Control Unit : 1 lbs. 5 oz. (0.6 kg)
Monitor
Liquid Crystal Panel : 7" wide
Screen Dimensions (W x H x D) : 6-1/16" x 3-7/16" x 6-15/16" (154 x 87 x 177 mm)
Number of Pixels : 336,960 pixels (234 vertical x 480 horizontal x 3)
Valid Pixel Ratio : Over 99.99%
Display Method : Transparent color filter format
Drive Method : TFT (Thin Film Transistor) active matrix format
Light Source : Internal light (Built-in small fluorescent lamp)
CD Player
Sampling Frequency : 8 times oversampling
DA Converter : MASH•1 bit/4 DAC System
Error Correction System : Panasonic Super Decoding Algorithm
Pick-Up Type : Astigma 3-beam
Light Source : Semiconductor Laser
Wave Length : 780 nm
Frequency Response : 20 Hz - 20 kHz (±1 dB)
Signal to Noise Ratio : 80 dB (IHF, A)
Total Harmonic Distortion : 0.05 % (1 kHz)
Wow and Flutter : Below measurable limits
Channel Separation : 80 dB
Supplied Speaker
Impedance : 8
Maximum Power Input : 2 W
Above specifications comply with EIA standards.
Note: Specifications and the design are subject to modification without notice due to improvements in technology.

Related product manuals