Panasonic CY-VMC7000U - Page 22

VOLUME
MENUMUTE MODE NAVI
NAVIGATION ASPECT
P
·
MODEPOWER
ASP
ENTER
CY-VMC7000U
IN-DASH 7 WIDE COLOR LCD MONITOR / CD PLAYER
DISC/BAND
TRACK/
YUNE
ENTER
25
CY-VMC7000U
16
E
N
G
L
I
S
H
Notes:
¡Press [MODE] to return to the regular mode.
¡The display returns to the previous one if there is no
operation for more than 60 seconds after changing
to the setting / adjusting menu.
3
q Press [[], []], [}] or [{] to select and
adjust.
w Press [ENTER] to set. (for NAVI SETUP)
The monitor position setting menu can also be displayed by pressing the [TILT] button on the display unit
for more than 1 second. (For details, refer to page 15.)
Notes:
¡For smooth adjustment, make sure to first return the lateral angle to the neutral position and then adjust the tilt
angle.
¡Front-rear position "REAR" and tilt angle "5" cannot be selected at the same time.
Tilting angle adjustment :
Front-rear position :
REARFRONT
54321
Navigation Input
: Connected to the RGB input cord, or a car navigation system not connected
: Connected to the VTR1-IN
: Connected to the VTR2-IN
VTR2
VTR1
RGB
NAVI IN
Speaker Setting (Output setting of accessory speakers)
: Sound does not come out.
: The sound comes out in the same mode as the picture.
: The sound from the Panasonic car navigation system (not available yet) always comes out.
NAVI
AUTO
OFF
SP SETUP
[}] [{]
[]] [[]
(Select and Adjust)
[ENTER]
1
2
3
4
5
6
7
8
9
A
0
[}] [{]
[]] [[]
(Select and Adjust)
[ENTER]
[MODE]
[MENU]
Tilt Angle
1 to 5
[{][}]
Front-Rear Position
Front Rear
[]][[]