ー 170 ー
Web settingIntelligent Controller web settings
[Network settings] screen
XXX.XXX.XXX.XXX
XXX.XXX.XXX.X
1
DHCP is set to Off.
□ of DHCP On is left blank (unchecked)
2
Set the following IP address for the Intelligent Controller.
IP address obtained for Intelligent Controller
3
Set the following net mask for the Intelligent Controller.
Subnet mask obtained for Intelligent Controller
4
After setting, select the [Register] button.
Setting the PC is unnecessary.
After setting up the network, conrm the network connection referring to “[4] Checking connection to the Web”.
1
2
3
TGR-318_ENG.indb 170 2017/04/06 10:44:48
To Next Page
Loading...
