2
Safety Precautions
Please Read Before Starting
z This controller must be installed by the sales dealer or installer.
These instructions are all you need for most installation sites and maintenance
conditions. If you require help for a special problem, contact our sales/service outlet
or your certied dealer for additional instructions.
WARNING
This symbol refers to a hazard or unsafe practice which can result in
severe personal injury or death.
CAUTION
This symbol refers to a hazard or unsafe practice which can result in
personal injury or product or property damage.
z We assume no responsibility for accidents or damages resulting from methods
other than those described in the installation instructions or methods without using
specied parts. Malfunctions that occurred due to the unauthorised installation
methods are not covered by the product warranty.
z This controller shall be installed in accordance with National Wiring Regulations.
z Read the installation instructions of devices to be connected as well.
z When relocating or repairing this controller, provide the Installation Instructions to the
servicing personnel.
WARNING
z Turn off the circuit breaker of the units before installation.
z Do not supply power to the controller until all wiring is
completed or reconnected and checked.
z Select an installation location which is rigid and strong
enough to support or hold the controller, and select a location
for easy maintenance.
z This product must not be modied or disassembled under
any circumstances.
Modied or disassembled controller may cause re, electric
shock or injury.
z Do not clean inside the controller by users.
Engage authorized dealer or specialist for cleaning.
z Do not operate with wet hands.
ENGLISH
To Next Page
Loading...
