Editing video
VQT4W68
49
To cancel a “Now” conversion
Press and hold [BACK/RETURN ] for more
than 3 seconds.
To confirm whether the conversion is
completed
Press [DIRECT NAVIGATOR].
e.g.,
When “±± > ±± (Recording mode for
conversion)” is displayed, the conversion has not
finished.
To cancel a “During standby” conversion
After performing steps 1–3 (> 46)
1 Select “File Conversion” in “Edit”, then press
[OK].
2 Select “Yes”, then press [OK].
• To use “File Conversion”, the HDD needs enough storage
capacity.
• The size of converted title might increase depending on the
title.
• File Conversion is stopped when this unit is turned on
during performing “During standby” conversion. Conversion
will start from the beginning again once the unit is switched
to standby mode.
• When converted, the audio content and subtitle language
will be selected according to the following settings:
- “Multi Audio” of “Preferred Multi Audio” (> 85)
- “Subtitles” of “Preferred Subtitles” (> 85)
- Audio for HG / HX / HE / HL / HM Recording (> 89)
• When converted, 3D information may not be retained.
• In titles with the Auto Renewal Recording function (> 33)
set, a programme may be unintentionally converted while in
“During standby”.
[HDD] [USB_HDD] [ BD-RE] [BD-R] [RAM]
1 Select “Chapter View”, then press [OK].
2 Perform the editing operations.
Playback from Chapter View
Refer to “Playback from Chapter View”. (> 38)
• The maximum number of chapters:
(Depends on the state of recording.)
[HDD ] [USB_HDD]: Approx. 1000 per title
[BD-RE] [ BD-R] [RAM]: Approx. 1000 per disc
• [HDD] [USB_HDD] When the title has the maximum number of
chapters, you cannot perform the Resume play function
(> 36) or the “Changing thumbnail” (> 47) with the title.
Start Time
Prog.Type:
Rec Time
Channel Date Title Name Titles
Movie
9:00
1h00m (DR HL)
/
/
/
/
Editing chapters
Edit Chapter Mark:
Select the point where you want to start a new
chapter while viewing the title.
1 Press the green button.
2 Press [OK] at the point you want to divide.
• Repeat this step.
3 Press [BACK/RETURN ] to go to
Chapter View screen.
To delete the chapter:
1 Select the chapter, then press [DEL].
Multiple editing
Select the chapter, then press the yellow
button.
A check mark is displayed. Repeat this
step.
• Press the yellow button again to cancel.
2 Select “Delete”, then press [OK].
To combine chapters (Delete chapter
mark):
1 Select the chapter, then press [OPTION].
2 Select “Combine Chapters”, then press
[OK].
3 Select “Combine”, then press [OK].
The selected chapter is combined to the
next chapter.
DMR-BWT735EB_eng.book 49 ページ ２０１３年３月２７日 水曜日 午後４時５分
To Next Page
Loading...
Need help?
General
