Panasonic DMC-FX12 - Page 37

Advanced (Recording pictures)
37
VQT1C27
• The flash setting is memorised even if the
camera is turned off. However, the scene
mode flash setting is reset to the initial
setting when the scene mode is changed.
∫ Available flash range by ISO
sensitivity
• The available flash range is an
approximation.
• The available focus range differs
depending on the recording mode. (P102)
• If you use the flash when the ISO
sensitivity is set to [AUTO] or when the
highest ISO sensitivity is set to a setting
other than [ISO400] in intelligent ISO
sensitivity mode [ ] (P42), the ISO
sensitivity is automatically increased to a
maximum of [ISO640]. (It is a maximum of
[ISO400] in [BABY1]/[BABY2] (P48) and
[PET] (P49) in scene mode.)
• If you take a picture with the flash at close
range when the zoom is near [W] (1k),
the edges of the recorded picture may
become dark. Rotate the zoom lever
slightly and then take the picture.
∫ Available flash range in Intelligent ISO
sensitivity mode
ISO sensitivity
(P60)
Available flash range
[AUTO]
Wide
30 cm to 5 m
Tele
30 cm to 2.8 m
[ISO100]
Wide
30 cm to 2 m
Tele
30 cm to 1.1 m
[ISO200]
Wide
40 cm to 2.8 m
Tele
30 cm to 1.5 m
[ISO400]
Wide
60 cm to 4 m
Tele
40 cm to 2.2 m
[ISO800]
Wide
80 cm to 5.6 m
Tele
60 cm to 3.1 m
[ISO1250]
Wide
1m to 5.6m
Tele
80 cm to 3.1 m
Highest
ISO
sensitivity
(P42)
Available flash range
Wide Tele
ISO400 Approx.
30 cm to
approx. 4.0 m
Approx.
30 cm to
approx. 2.2 m
ISO800 Approx.
30 cm to
approx. 5.0 m
Approx.
30 cm to
approx. 2.8 m
ISO1250
VQT1C27ENG.book 37 ページ ２００６年１２月２８日 木曜日 午前１１時５３分