EasyManua.ls Logo

Panasonic DMC-FX12 - Optical Image Stabilizer

Panasonic DMC-FX12
104 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Advanced (Recording pictures)
41
VQT1C27
Optical Image
Stabilizer
This mode detects jitter and compensates
for it.
1 Press and hold the optical image
stabilizer button A until
[STABILIZER] appears.
2 Press 3/4 to select the
stabilizer function mode and then
press [MENU/SET].
About the jitter/movement detection
demonstration screen
Press 1 on the screen shown in step
2 to
display the jitter/movement detection
demonstration screen. (You cannot take
pictures while the demonstration screen is
displayed.)
Press 1 to exit the demonstration screen.
A: Jitter detection demonstration
B: Movement detection demonstration
The camera automatically detects the
jitter and the movement of the subject and
displays these on the indicator.
We recommend using a bright subject
with high contrast for the subject
movement demonstration.
The jitter/movement detection
demonstration screen is an
approximation.
The camera also detects the movement of
the subject when automatically setting the
ISO sensitivity in intelligent ISO sensitivity
mode [ ] (P42) and [SPORTS] (P46),
[BABY1]/[BABY2] (P48) and [PET] (P49)
in scene mode only.
The stabilizer function may not be
effective in the following cases.
When there is a lot of jitter.
When the zoom magnification is high.
In digital zoom range.
When taking pictures while following a
moving subject.
When the shutter speed becomes
slower to take pictures indoors or in dark
places.
Be careful of camera jitter when you press
the shutter button.
The setting is fixed to [MODE2] in simple
mode [ ] and [SELF PORTRAIT] (P46)
in scene mode and fixed to [OFF] in
[STARRY SKY] (P49) in scene mode.
In motion picture mode [ ], [MODE2]
cannot be set.
[MODE1]
()
The stabilizer operates
continuously and can assist
during photo composition.
[MODE2]
()
The jitter is compensated for
when the shutter button is
pressed. There is a greater
stabilizing effect.
[OFF]
()
When the stabilizer is not
desired.
STABILIZER
OFF
MODE2
DEMO.SELECT
MODE1
SET
MENU
MENU
SET
EXIT
JITTER, SUBJ. MOVE DEMO.
CANNOT BE DISPLAYED
IN REC MODE
VQT1C27ENG.book 41 ペー 006年12月28日 木曜日 午前11時53分

Table of Contents

Related product manuals