231
Wi-Fi/NFC
• You can register up to 20 smartphones/tablets. When the number exceeds 20, registrations will
be deleted, starting from the oldest touched one.
• Performing [Reset Wi-Fi Settings] will delete the smartphone/tablet registration.
• If the camera is not recognized even when touching the smartphone/tablet, change positions
and try again.
• Do not touch this camera to the smartphone/tablet strongly.
• For information on the operation and settings of NFC-compatible smartphones/tablets, refer to
the operating instructions of your device.
• If there is a metal object between this camera and the smartphone/tablet, reading may fail.
Also, putting a sticker around the NFC area may deteriorate the communication performance.
• This function cannot be used in the following cases.
– When connecting to a PC or a printer
– When recording motion pictures
When connecting for the first time, the connection confirmation screen is
displayed
1 When the connection confirmation screen is displayed on this unit, select
[Yes].
2 Touch the smartphone/tablet to [ ] of the camera again.
•
The connected smartphone/tablet is registered to this camera.
To Next Page
Loading...
