To Next PageTo Next PageWhy does panorama picture recording stop before finishing on my Panasonic Digital Camera?
If panorama picture recording stops before finishing, it may be because the pan motion of the camera is too slow, causing the camera to assume the operation has been aborted. To record panorama pictures, pan the camera in a small circular motion parallel to the recording direction at a speed of approximately 8 seconds per revolution.
Why is the zoom not functioning normally on my Panasonic Digital Camera?
If the zoom does not function normally on your Panasonic Digital Camera, and operates in steps, set [Step Zoom] to [OFF].
Why does the monitor flicker indoors on my Panasonic Digital Camera?
If the monitor flickers indoors on your Panasonic Digital Camera, it may flicker for a few seconds after turning on. This is an operation to correct flicker caused by lighting such as fluorescent lights.
Why can't I communicate with the computer using my Panasonic Digital Camera?
If you cannot communicate with the computer, the camera might not be connected correctly. Check the connection and set [USB Mode] to [PC].
Why are my recorded pictures too bright or too dark on my Panasonic Digital Camera?
If the recorded pictures on your Panasonic Digital Camera are too bright or too dark, you should adjust the exposure settings.
Why is there no flash emitted from my Panasonic Digital Camera?
If no flash is emitted from your Panasonic Digital Camera, the flash may be retracted into the camera housing. Operate the flash open switch to open the flash.
Why does my Panasonic Digital Camera not record pictures?
If your Panasonic Digital Camera cannot record pictures, it may be because the built-in memory or card is full. To fix this, free up space by deleting unwanted pictures.
Why do recorded pictures look white with my Panasonic DMC-LX7 Lumix?
If recorded pictures look white, the lens may be dirty (fingerprints, etc.). Turn on the power to extract the lens barrel and clean the lens surface with a soft, dry cloth.
Why is there no picture displayed on the LCD monitor of my Panasonic DMC-LX7 Lumix?
If no picture is displayed on the LCD monitor of your Panasonic Digital Camera, [Opt. Viewfinder] may be set to [ON]. Press the [DISP.] button to switch to the LCD monitor display.
Why is my Panasonic Digital Camera switching off as soon as power is turned on?
If your Panasonic Digital Camera switches off as soon as the power is turned on, the Live View Finder (optional) display may be selected. Press the [LVF/LCD] button of the Live View Finder (optional) to switch to the LCD monitor display.
General| Brand | Panasonic |
|---|---|
| Model | DMC-LX7 Lumix |
| Category | Digital Camera |
| Language | English |
