1. Insert the battery terminals and attach the battery to the charger, Ensure [LUMIX] faces outwards.
2. Connect the charger to the electrical outlet Charging light ([CHARGE])
About batteries that you can use with this unit The battery that can be used
with this unit is DMW-BCJ13E.
Use the dedicated charger and battery.
The battery is not charged when the camera is shipped. Charge the battery and set the clock before use.
Charge the battery with the charger indoors (10 °C to 30 °C)
Inserting and removing the card (optional)/the battery
Check that this unit is turned off.
1. Slide the release lever ( ) to the [OPEN] position and open the card/battery door
2. Insert the battery and card, making sure that their orientation is correct
Do not touch the terminals on the back of the card.
· Battery: Insert the battery all the way firmly until a locking sound is heard, and check that it is locked by lever ( ).
· Card: Insert the card all the way firmly until it clicks.
3. Close the card/battery door
Slide the release lever to the [LOCK] position.
To remove
· To remove the battery: Move the lever in direction of the arrow.
· To remove the card: Push the card until it clicks, then pull the card out.
Always use genuine Panasonic batteries (DMW-BCJ13E).
If you use other batteries, we cannot guarantee the quality of this product.
Keep the Memory Card out of reach of children to prevent swallowing.
We recommend using a Panasonic card.
To Next Page
Loading...
Need help?
General
