Panasonic DMC-TZ57 - Slide Show; Filtering Play; Deleting Pictures and Movies; Playback

6
6. PLAYBACK
 Press the Playback button .
 By default:  PLAYBACK MODE  All . (shows all the pictures in the SD card and memory)
Picture Play (All)
  to select the Picture to be played back. Hold buttons for fast backward/forward.
 Zoom Tele: zooms-in on the picture onscreen: 2x, 4x, 8x and 16x.
o  moves enlarged picture section.
 Zoom Wide: zooms-out and then produces 12 pictures, 30 pictures, Calendar.
o 12/30 screens: press  to select a picture/Movie and  to show it.
o Calendar: press  to select a day and  to show only pictures/movie of that day.
 Zoom for a Movie: controls the playback volume.
Slide Show Pictures only
  PLAYBACK MODE  SLIDE SHOW,  and select:
 START : slide show.  Play/Pause,  Stop, Back while paused,  Next while paused.
 SETUP: enters another menu: EFFECT, DURATION (1”/ 2” / 3”/ 5”) and REPEAT.
 Once the show ends, camera returns to NORMAL PLAY.
Filtering Play
  PLAYBACK MODE  FILTERING PLAY  : Picture, Video, 3D, Travel, Category. Etc.
Movie Divide
 Splits a Movie in two, allowing later to delete unneeded beginning or end.
  PLAYBACK  p.2 VIDEO DIVIDE .
  to select the Movie to be divided.
  play movie,  pause at the point to split,  to split: Confirmation screen displayed, etc.
Protect Pictures or Movies
  PLAYBACK  p.3  PROTECT : follow menus. Protected items shown with .
Deleting Pictures and Movies
  , select alternatives with  and act with .
 DELETE MULTI: shows 6 pictures per screen.
Select pictures with  and press DISPLAY to select. Press  to delete them.
 If you exit without deleting, your selection marks are NOT memorised.
Copy between SD card and internal memory e.g. for crucial backup
  PLAYBACK  p.3 COPY:
 INSD: Copy built-in memory to SD card etc.
 SDIN: Copy one item from SD card to built-in memory: select with  and act with .
Wi-Fi control via Smartphone
 Have a smartphone ready with Wi-Fi enabled and the Panasonic Image App installed.
 Press the camera’s Wi-Fi button. Follow the directions on screen. Blue lamp goes on.
 Put the camera in place over a table or tripod. Go to the smartphone and start the Image App.
 To finalise, end the Image App. In the camera follow directions until the blue lamp goes off.
 Wi-Fi to send images to PC: see Advanced Manual p. 153.
PC USB Connection
 Connect: The PC should be ON. Connect it to the camera with the USB cable.
 Camera OFF: Battery recharges. Camera ON: USB power is used, battery does not recharge.
 RECORDING: Camera can be used with PC power.
 PLAYBACK: Camera connects to PC to download. Cannot delete files in the SD card!
 DISCONNECT: Ensure no ACCESS shows in the camera, then use the PC’s USB Disconnect tray.