4 Burn Firmware
NOTES:
Use one of the below methods to burn the firmware file to a CD-R disc.
Use the ISO-9660 file system without using Joliet.
4.1 Windows
® OS CD Writing Program
1) Insert a blank CD-R disc into a CD Burner Drive installed in or attached to the computer.
2) If the below (or similar) screen appears (Windows XP), left click on CANCEL.
3) Right click on the PANA_DVD.FRM file on the DESKTOP, mouse over SEND TO, and
then left click on the CD BURNER DRIVE.
NOTE: If the below screen appears, left click on YES.
DMP-BD55 Blu-Ray Disc Player Firmware Installation Instructions
Page 5 of 8
To Next Page
Loading...
Need help?
General
