Panasonic DMP-BD77 - HDMI CEC Functionality; Automatic Device Linking

Playback
21
VQT3V42
“HDMI CEC”
This unit supports HDMI CEC (Consumer
Electronics Control).
You can use this function by connecting the
equipment with an HDMI cable. See the
operating instructions for connected
equipment for operational details.
Preparation
1 Set “HDMI CEC” to “On” (> 27).
(The default setting is “On”.)
2 Set the “HDMI CEC” operations on the
connected equipment (e.g., TV).
3 Turn on all “HDMI CEC” compatible
equipment and select this unit’s input channel
on the connected TV so that the “HDMI CEC”
function works properly.
Also when the connection or settings are
changed, repeat this procedure.
When play starts on the unit, the TV will
automatically switch the input channel and the
screen of this unit will be displayed.
Additionally when the TV is off, the TV will
automatically turn on.
All connected equipment compatible with “HDMI
CEC”, including this unit, automatically turns off
when you switch the television off.

≥ Operation cannot be guaranteed on all HDMI CEC
devices.
Automatic input switching
Power on link
Power off link
DMP-BD77GN-VQT3V42.book 21 ページ ２０１２年３月７日 水曜日 午前１０時１１分