Panasonic DMP-BD77 - Control Reference Guide; Remote Control Operations; Unit Controls and Indicators

Getting started
7
VQT3V42
Control reference guide
1 Standby/on switch (Í/I) (> 11)
Press to switch the unit from on to standby
mode or vice versa. In standby mode, the unit
is still consuming a small amount of power.
4 Display (> 33)
5 Remote control signal sensor
Distance: Within approx. 7 m
Angle: Approx. 20e up and down, 30e left and
right
Rear panel terminals (> 8–10)
1
2
3
6
4
5
7
8
19
10
9
20
18
16
15
17
14
13
12
11
1 Turn the unit on and off
2 TV operation buttons (> 13)
You can operate the TV through the unit’s
remote control.
[Í TV] : Turn the television on and off
[AV] : Switch the input select
[ijVOL] : Adjust the volume
3 Select title numbers, etc./Enter numbers
4 Cancel
5 Select audio (> 16)
6 Basic playback control buttons (> 16)
7 Show status messages (> 17)
8 Show Top menu (> 17)
9 Show Option menu (> 22)
10 Coloured buttons (red, green, yellow, blue)
Used for various purposes depending on the
display
11 Transmit the remote control signal
12 Open or close the disc tray (> 14)
13 Switch on/off Secondary Video
(Picture-in-picture) (> 22)
14 Show Setup menu (> 24)
15 Show the selection screen of network
features (> 18)
16 Exit the menu screen
17 Show Pop-up menu (> 17)
18 Show HOME menu (> 14)
19 [3, 4, 2, 1] :
Move the highlight for selection
[OK] : Confirm the selection
(;1) : Frame-by-frame (> 16)
20 Return to previous screen
1 8
2 3 4 6 75
2 Disc tray (> 14)
3 USB port (> 14) 6 Stop (> 16)
7 Start play (> 16)
8 Open or close the disc tray (> 14)
DMP-BD77GN-VQT3V42.book 7 ページ ２０１２年３月７日 水曜日 午前１０時１１分