28
VQT3V42
∫ Quick Start
Speed of startup from standby mode is increased.
≥ When set to “On”, the internal control unit will be
powered and the idle power consumption will
increase so compared to when set to “Off”.
(About the power consumption > 34)
∫ Remote Control
Change the remote control code if other
Panasonic products react to this remote control.
∫ Firmware Update (> 12)
¾ Automatic Update Check
When this equipment remains connected to the
Internet, it will check for the latest firmware
version when it is turned on and you can update
it if necessary.
¾ Update Now
You can update the firmware manually if a
firmware update is available.
∫ System Information
¾ Software Licence
Information about the software used by this unit
is displayed.
¾ Firmware Version Information
∫ DivX (R) Registration
You need this registration code to purchase and
play DivX Video-on-Demand (VOD) content.
∫ Default Settings
This returns all values in the Setup menu and the
Option menu to the default settings, except for
some settings of network, ratings, remote control
code, language, etc.
Press [OK] to show the following settings:
Press [OK] to show the following settings:
Display firmware version of this unit and
wireless LAN module.
DMP-BD77GN-VQT3V42.book 28 ページ ２０１２年３月７日 水曜日 午前１０時１１分
To Next Page
Loading...
