Panasonic DMP-BD79 - Control Reference Guide

8
VQT4W89
Control reference guide
1
2
3
6
4
5
7
8
19
10
9
20
18
16
15
17
14
13
12
11
1 Turn the unit on and off
2 TV operation buttons
You can operate the Panasonic TV using the
unit’s remote control. Some buttons may not
work depending on the TV.
[Í TV] : Turn the TV on and off
[AV] : Change input
[ijVOL] : Adjust the volume
3 Select title numbers, etc./Enter numbers
4 Cancel
5 Select audio (> 17)
6 Basic playback control buttons (> 17)
7 Show USB Sharing menu (> 22)
8 Show Top menu (> 18)
9 Show Option menu (> 23)
10 Coloured buttons (red, green, yellow, blue)
Used for various purposes depending on the
display
11 Transmit the remote control signal
12 Open or close the disc tray (> 14)
13 Show status messages (> 18)
14 Switch Secondary Video on/off
(Picture-in-picture) (> 23)
15 Show the Home screen of Network Service
(> 19)
16 Exit the menu screen
17 Show Pop-up menu (> 18)
18 Show HOME menu (> 15)
19 [3, 4, 2, 1] : Move the highlight for
selection
[OK] : Confirm the selection
(;1) : Frame-by-frame (> 17)
20 Return to previous screen
9876
123 4 5
1 Disc tray (> 14)
2 USB ports (> 14, 22)
3 INFO LED (> 30, “LED indicators”)
Displays the various states of this unit.
4 POWER LED
Blinks when the power is turned on.
Wait for the LED to turn solid green before
using this unit.
5 Remote control signal sensor
Distance: Within approx. 7 m
Angle: Approx. 20e up and down, 30e left and
right
6 Open or close the disc tray (> 14)
7 Stop (> 17)
8 Start play (> 17)
9 Standby/on switch (Í/I) (> 11)
Press to switch the unit from on to standby
mode or vice versa. In standby mode, the unit
is still consuming a small amount of power.
Rear panel terminals (> 9–10)
DMP-BD79_EG-VQT4V15_mst.book 8 ページ ２０１３年１月１７日 木曜日 午後２時３６分