Panasonic DMP-BD79 - Connecting to a TV; Connecting to an Amplifier;Receiver

Connections and settings
9
VQT4W89
Connections and settings
Connecting to a TV
Connect the AC mains lead after making all connections.
≥ Before making any connections, we recommend that you temporarily disconnect all the units from AC
power.
≥ Use the High Speed HDMI cables. Non-HDMI-compliant cables cannot be utilized.
It is recommended that you use Panasonic’s HDMI cable. When outputting 1080p signal, please use
HDMI cables 5.0 meters or less.
≥ This unit consumes a small amount of AC power (> 35) even when turned off. For the purpose of
power conservation, the unit can be disconnected if you will not be using it for extended period of
time.
Connecting to an amplifier/receiver
≥ Set “Digital Audio Output” (> 26).
≥ When using the TV or amplifier/receiver that does not have the indication of “(ARC)”
(non-ARC-compatible) on the HDMI terminal, the amplifier/receiver and TV must also be connected
using an optical digital cable in order to enjoy the TV’s sound through the amplifier/receiver.
Getting started
The HDMI-compliant cable is supplied with this unit.
[For]the]Middle]East]
Use the AC mains lead that matches the socket for the area you live in.
≥ In Saudi Arabia, always use the 3-pin AC mains lead.
[For[South[East[Asia]
AC mains lead with a label is for Thailand.
AC mains lead without a label is for areas other than Thailand.
HDMI IN
To a household mains socket
AC mains lead (supplied)
HDMI cable (supplied)
HDMI IN
(ARC)
HDMI OUT
(ARC)
HDMI IN
HDMI cable (supplied)
HDMI cable
Amplifier/receiver
DMP-BD79_EG-VQT4V15_mst.book 9 ページ ２０１３年１月１７日 木曜日 午後２時３６分