Panasonic DMP-BDT300 - Connecting to Amplifier or Receiver; Digital Audio Connections via HDMI

10
VQT2T11
STEP 2 : Connecting to an amplifier/receiver
Digital Audio
∫ Via an HDMI MAIN AV OUT terminal
– It is possible to playback 3D videos when the
connected TV and amplifier/receiver are 3D
compatible.
∫ Via an HDMI MAIN AV OUT and HDMI SUB AV
OUT terminal
– It is possible to playback 3D videos when the
connected TV is 3D compatible, even if the amplifier/
receiver is not 3D compatible.
≥ Set “HDMI Video Mode” and “HDMI Audio Output” to “On”
(> 32).
≥ Set “Digital Audio Output” depending on the connected
amplifier/receiver (> 31).
≥ The HDMI connection using HDMI MAIN AV OUT supports
VIERA Link “HDAVI Control” (> 27).
≥ Set “HDMI Video Mode” and “HDMI Audio Output” to “On”
(> 32).
≥ Set “HDMI(SUB) Output Mode” to “V.OFF(Video Off)”.
(> 22)
– Audio is output in high resolution regardless of
compatibility of the amplifier/receiver with 3D.
≥ The HDMI connection using HDMI MAIN AV OUT supports
VIERA Link “HDAVI Control” (> 27).
The HDMI SUB AV OUT terminal is not compatible with the
VIERA Link “HDAVI Control”.
HDMI IN
HDMI IN
HDMI IN
Multi channel
speakers
Amplifier/receiver
HDMI cable
HDMI cable
HDMI IN
HDMI IN
Amplifier/receiver
HDMI cable
Multi channel
speakers
DMP-BDT300EG-VQT2T11 _eng.book 10 ページ ２０１０年３月１０日 水曜日 午前１０時５９分