Panasonic DMP-BDT300 - Remote Control and Unit Operation Guide; Remote Control Button Functions; Unit Front Panel Controls and Indicators

5
VQT2T11
Getting started
Control reference guide
1 Turn the unit on and off (> 14)
2 Open or close the disc tray (> 17)
CAUTION
Do not place objects in front of the unit. The disc tray may
collide with objects when it is opened, and this may cause
malfunction.
3 Select title numbers, etc./Enter numbers or characters
(> 24)
[CANCEL] : Cancel
4 Basic playback control buttons (> 18)
5 Show status messages (> 18)
6 Show Top menu/DIRECT NAVIGATOR (> 18)
7 Selection/OK, Frame-by-frame (> 18)
8 Show OPTION menu (> 19)
9 Coloured buttons (red, green, yellow, blue)
These buttons are used when;
≥ Operating a BD-Video disc that includes Java
TM
applications (BD-J).
≥ Displaying “Title View” and “Album View” screens.
(> 23)
≥ Operating contents of VIERA CAST. (> 24)
10 Show Setup menu (> 30)
11 Switch on/off Secondary Video (Picture-in-picture) (> 20)
12 Transmit the remote control signal
13 TV operation buttons (> 16)
You can operate the TV through the unit’s remote control.
[Í TV] : Turn the television on and off
[AV] : Switch the input select
[ijVOL] : Adjust the volume
[WXCH] : Channel select
14 Adjust the volume of an amplifier/receiver.(> 16)
15 Mute the sound of an amplifier/receiver.
16 Select audio (> 18)
17 Displays the Home screen of the VIERA CAST (> 24)
18 Exit the menu screen
19 Show Pop-up menu (> 18)
20 Show FUNCTION menu (> 17)
21 Return to previous screen
22 Select drive (BD/DVD/CD, SD card or USB device)
(> 17)
23 Show playback menu (> 28)
':+6
/76'
1-
%*
2+2 &+52.#; 5'672 &4+8'
1
2
3
4
5
6
7
9
8
11
10
20
19
22
21
15
17
16
18
14
13
12
23
1 2 5
87 9 10
4 63
11
Pull to flip down
the front panel.
1 Standby/on switch (Í/I) (> 14)
Press to switch the unit from on to standby mode or vice
versa. In standby mode, the unit is still consuming a small
amount of power.
2 Disc tray (> 17)
3 Display
The indicator blinks when reading data from a disc, a card
or a USB device, or writing data to a card.
4 V.OFF LED (Video off LED)
≥ It is possible to set the LED to turn on/off. (> 31)
5 Remote control signal sensor
Distance: Within approx. 7 m
Angle: Approx. 20e up and down, 30e left and right
6 Open or close the disc tray (> 17)
7 SD Card LED
≥ It is possible to set the LED to turn on/off. (> 31)
8 SD card slot (> 17)
9 USB port (> 17)
10 Stop (> 18)
11 Start play (> 18)
Rear panel terminals (> 8–13)
Disc indicator SD card indicator
USB device
indicator
DMP-BDT300EG-VQT2T11 _eng.book 5 ページ ２０１０年３月３日 水曜日 午後６時３３分