Panasonic DMP-BDT300 - Connecting to a Broadband Network; Wired Network Connection (LAN); Wireless Network Connection (Wi-Fi)

12
VQT2T11
STEP 3 : Connecting to a broadband network
The following services can be used when this unit is
connected to broadband.
For details about connection method, refer to the instructions
supplied with the connected equipment.
≥ Firmware can be updated (> 16)
≥ You can enjoy the BD-Live (> 20)
≥ You can enjoy the VIERA CAST (> 24)
≥ DLNA feature (> 25)
∫ Using LAN (ethernet) cable
\For\the\United\Kingdom,\Continental\Europe\and\Republic\of\Ireland\
∫ Using Wireless LAN Adaptor DY-WL10
≥ Use shielded LAN cables when connecting to peripheral
devices.
≥ Inserting any cable other than a LAN cable in the LAN
terminal can damage the unit.
≥ Wireless LAN Adaptors other than the supplied Wireless
LAN Adaptor cannot be used.
≥ When connection conditions are poor, use the included
USB extension cable to connect the Wireless LAN Adaptor
provided with this unit.
≥ Do not use any other USB extension cables except the
supplied one.
≥ For up to date compatibility information on your Wireless
router (Access Point) refer to
http://panasonic.jp/support/global/cs/
≥ The unit is not compatible with public wireless LAN services
(Hotspot etc.) provided in airports, stations, cafes etc.
Broadband router, etc.
Internet
LAN Cable
(Straight)
Wireless router
(Access point),
etc.
Wireless LAN Adaptor
(supplied)
Internet
DMP-BDT300EG-VQT2T11 _eng.book 12 ページ ２０１０年３月３日 水曜日 午後６時３３分