Panasonic DMP-BDT500 - Digital Audio Connections; Optical or Coaxial Digital Audio Output; 5.1;7.1 ch Audio Output Connections

12
VQT3V91
≥ Set “HDMI Audio Output” to “Off” (> 29).
≥ Set “Digital Audio Output” (> 29).
Cable connections
A Front speaker (L/R)
B Surround speaker (L/R)
C Center speaker
D Subwoofer
E Surround back speaker (L/R)
(Only for 7.1ch AUDIO OUT)
≥ Set the “Analog Audio Output” to “7.1ch” or “2ch (Downmix) + 5.1ch”, depending on the used terminal
(> 30).
≥ You can set the “Analog Audio Output” from the easy setting (> 14).
≥ When connecting equipment with HDMI AV OUT terminal, set “HDMI Audio Output” to “Off” (> 29).
DIGITAL AUDIO OUT (OPTICAL or COAXIAL)
OPTICAL IN
COAXIAL IN
Amplifier/receiver
Optical digital cable
Coaxial cable
OR
5.1/7.1ch AUDIO OUT
Amplifier/receiver
Connect Audio
cables to terminals
corresponding to
the speakers you
have connected.
DMP-BDT500_VQT3V91_eng.book 12 ページ ２０１２年２月１４日 火曜日 午後１時９分