14
VQT3V91
STEP 5 : Settings
After connecting your new player for the first time
and pressing [Í], a screen for the basic settings
will appear.
Preparation
Turn on the television and select the
appropriate video input on the television.
1 Press [Í].
Setup screen appears.
2 Follow the on-screen instructions and
apply the settings.
≥ You can perform this setup anytime by selecting “Easy
Setting” in the Setup menu. (> 32)
≥ If this unit is connected to a Panasonic TV (VIERA)
supporting HDAVI Control 2 or later via an HDMI cable,
then setting information on the TV such as “On-screen
Language” is acquired by this unit.
≥ About “Analog Audio Output” setting:
Initial setting is set to “2ch (Downmix) + 5.1ch”, so you will
need to select “7.1ch” if using the 7.1ch output.
After completing “Easy Setting”, you can perform
“Easy Network Setting”.
Select “Wired”.
Follow the on-screen instructions to apply your
connection settings.
Preparation
≥ Obtain your network name (> 15, SSID).
≥ If your wireless connection is encrypted,
please be sure that you know your
encryption key (password).
1 Select “Wireless”.
2 Select “Search for wireless network” or
“WPS (PUSH button method)” , then
follow the on-screen instructions and
apply the settings.
∫ “WPS (PUSH button method)”
If you are using a wireless router that supports
WPS (Wi-Fi Protected Setup
TM
), you can easily
perform the settings.
Easy Setting
Easy Network Setting
Wired connection
Wireless connection
RETURN
Easy Network Setting
Wired
Wireless
Select a connection mode.
Current setting : Wired
OK
Wireless Settings
Select a connection method.
Please refer to the operating instructions of your wireless
access point about connection methods.
Search for wireless network
WPS (PUSH button method)
DMP-BDT500_VQT3V91_eng.book 14 ページ ２０１２年２月１４日 火曜日 午後１時９分
To Next Page
Loading...
