Convenient functions
VQT4W69
105
When the image does not match the screen size
of the TV, you can enlarge the image to fill the
screen.
1 Press [OPTION].
2 Select “Playback Settings” in “Playback
Menu”, then press [OK].
3 Select “Aspect” in “Basic Operation”, then
press [OK].
4 Select the item, then press [OK].
• This function does not work when watching 3D programme
and playing back 3D title or 3D photo.
• It may also be adjusted using the screen mode of the TV
etc.
• The screen mode is switched to “Normal” in the following
situations:
- when you change the channel
- when you start or end the playback of a title
- when you switch the unit on or to standby mode.
• [BD-V] [DVD-V] “Side cut” does not have any effect.
• When “TV Aspect” (> 94) is set to “Pan & Scan” or
“Letterbox”, the “Zoom” effect is disabled.
The HOLD function deactivates all buttons on the
unit and remote control.
Press and hold [OK] and [RETURN ]
simultaneously until “X HOLD” appears on the
unit’s display.
To cancel the HOLD function
Press and hold [OK] and [RETURN ]
simultaneously until “X HOLD” disappears.
Switching the aspect ratio of the
screen
Normal:
Normal output
Side cut:
The black bars on the right and left sides of
the 16:9 image disappear and the image is
enlarged.
Zoom:
The black bars on the top and bottom sides
of the 4:3 image disappear and the image is
enlarged.
HOLD function
DMR-BST835_735_730EG_eng.book 105 ページ ２０１３年７月１日 月曜日 午後４時５１分
To Next Page
Loading...
