Panasonic DMR-BST835 - Connection; Basic Connections

Getting started
VQT4W69
16
Connection
3D programmes can be played back when this unit is connected to a 3D compatible TV.
• Before connection, turn off all equipment and read the appropriate operating instructions.
Basic connections
∫ Satellite cable
• To record two programmes simultaneously or view TV during recording
A Connect both LNB IN 1 and LNB IN 2 to the satellite dish.
B When using Single cable router, connect satellite cable to LNB IN 1 terminal and activate two
user bands. (> 24)
• When you use only one satellite cable
C Connect LNB IN 1 terminal. (Two programmes simultaneous recording and viewing TV during
recording are impossible)
AV IN (EXT)
VIDEO
LNB 13V/18V 400mA max
IN 1 IN 2
HDMI
IN 1IN 1
IN 2IN 2
LNB 13V/ 18V 400mA max
IN 1IN 1
IN 2IN 2
LNB 13V/ 18V 400mA max
IN 1IN 1
IN 2IN 2
LNB 13V/ 18V 400mA max
This unit’s rear panel
Household mains socket
(AC 220 to 240 V, 50 Hz)
AC mains lead
(supplied)
• Connect only after all other
connections are complete.
HDMI cable
TV’s rear panel
Satellite dish
Satellite cable (> above)
Satellite dish
Satellite dish
Multi switcher Single cable
router
DMR-BST835_735_730EG_eng.book 16 ページ ２０１３年７月１日 月曜日 午後４時５１分