Getting started
VQT4W69
17
To connect and register the USB HDD
(optional)
Refer to “Registering the external HDD
(USB HDD)”. (> 79)
To connect the Communication Camera
(optional)
Refer to “Enjoying Network Service”. (> 76)
About HDMI cable
Use the High Speed HDMI cables.
Non-HDMI-compliant cables cannot be utilized.
It is recommended that you use Panasonic’s
HDMI cable.
When outputting 1080p signal or 24p(4K) signal,
please use HDMI Cables 5.0 meters or less.
• This unit cannot connect the TV that does not have the
HDMI terminal.
• The HDMI connection supports VIERA Link “HDAVI
Control” (> 81).
• You cannot connect this unit to DVI devices that are
incompatible with HDCP.
Depending on the device, images may not display properly
or at all when connecting with a DVI/HDMI switching cable.
(Audio cannot be output.)
• If you are connecting to a TV that is only compatible with
2 channel audio output, audio with 3 channels or more will
be down mixed and output as 2 channels, even if
connecting with an HDMI cable. (Some discs cannot be
down mixed.)
§
A 21-pin Adaptor is required for
AUDIO/VIDEO terminal.
When the unit is not to be used for a long
time
To save power, unplug it from the household
mains socket. This unit consumes a small
amount of power, even when the unit is in
standby mode.
[approx. 0.2 W (“Quick Start” is not
activated)]
Connect the Set Top Box or video equipment
AV IN (EXT)
VIDEO
AV
Set Top Box or video equipment
21-pin Scart cable
§
DMR-BST835_735_730EG_eng.book 17 ページ ２０１３年７月１日 月曜日 午後４時５１分
To Next Page
Loading...
