Panasonic DMR-BST835 - Play; Edit

Troubleshooting
VQT4W69
110
Troubleshooting guide
The time recorded on the disc and the
available time shown do not add up.
• [DVD-R] [+R] If you record or edit many times, the
remaining capacity is reduced and then
recording or editing may be disabled.
• Available disc space display may be different
from actual.
Encrypted titles cannot be decrypted.
• Depending on the encrypted service, it may not
be possible to decrypt certain content.
Cannot play back.
• The disc is dirty. (> 10)
• The disc is scratched or marked.
• The disc may not be able to play back if it was
not finalized or a Top Menu was not created on
the equipment used for recording.
• Refer to “Screen icons”. (> 40)
• Depending on the encrypted service, it may not
be possible to play back certain titles if they
have been recorded without being decrypted.
Audio and video momentarily pause.
• DVD-R DL and +R DL discs have two writable
layers on one side. Video and audio may
momentarily cut out when the unit is switching
layers.
BD-Video or DVD-Video is not played.
• Ensure the disc is for the correct BD-Video
region code or DVD-Video region number, and
is not defective. (> 9)
Image for the Quick View is not smooth.
• Image may not be played back smoothly in case
of high definition titles.
Cannot play the disc on other players.
• Refer to “Play on other players”. (> 9)
The available recording time does not
increase even after deleting titles on the disc.
• [BD-R] [DVD-R] [+R] Available space on the disc
does not increase even after deleting titles.
• [DVD-RW] [+RW] Available space on the disc
increases when you delete the last title.
Cannot edit.
• You may not be able to edit on the HDD if there
is no available space. Delete any unwanted
titles to create empty space. (> 49)
Cannot create a video playlist.
• Creation or editing of playlists cannot be done
on this unit.
Play
You have forgotten your rating PIN.
• The rating level returns to the factory preset.
1 While the unit is on, press and hold [OK], the
yellow button and the blue button at the
same time for more than 5 seconds.
• “00 RET” is displayed on the unit’s display.
2 Repeatedly press [1] (right) until “03 VL” is
displayed on the unit’s display.
3 Press [OK].
• “INIT” is displayed on the unit’s display.
Edit
DMR-BST835_735_730EG_eng.book 110 ページ ２０１３年７月１日 月曜日 午後４時５１分