Editing video
VQT4W69
53
To cancel a “During standby” conversion
After performing steps 1–3 (> 50, Editing)
1 Select “File Conversion” in “Edit”, then press
[OK].
2 Select “Yes”, then press [OK].
• To use “File Conversion”, the HDD needs enough storage
capacity.
• The size of converted title might increase depending on the
title.
• Teletext will not be recorded.
• File Conversion is stopped when this unit is turned on
during performing “During standby” conversion. Conversion
will start from the beginning again once the unit is switched
to standby mode.
• When converted, the audio content and subtitle language
will be selected according to the following settings:
- “Multi Audio” of “Preferred Language” (> 88)
- “Subtitles” of “Preferred Language” (> 88)
- Audio for HG / HX / HE / HL / HM Recording (> 93)
• When converted, 3D information may not be retained.
• In titles with the Auto Renewal Recording function (> 37)
set, a programme may be unintentionally converted while in
“During standby”.
[HDD]
Encrypted titles ( ) can be decrypted manually.
To cancel the decryption
Press and hold [RETURN ] for more than
3 seconds.
• For decryption, the CI module that supports the programme
is necessary.
• Depending on the programme, playback/decryption may
not be possible.
• During decryption, do not remove the CI module from this
unit.
File Decryption
1 Select “File Decryption” in “Edit”, then press
[OK].
2 Select whether to delete the original title or
not, then press [OK].
•Yes
The original title will be deleted to save HDD
capacity after decryption.
•No
The original title remains after decryption.
3 Select “Start”, then press [OK].
Decryption starts.
“Decrypting” appears during decryption.
• When a title that is copy protected (One
generation copy is permitted) is selected, the
original title will be deleted after decryption.
(> 15)
• When a decryption fails, the screen icon
( ) is changed to “ ”.
DMR-BST835_735_730EG_eng.book 53 ページ ２０１３年７月１日 月曜日 午後４時５１分
To Next Page
Loading...
