Getting started
SQT0826
17
To connect and register the USB HDD
(optional)
Refer to “Registering the external HDD
(USB HDD)”. (> 65)
About HDMI cable
If you use an optional HDMI cable, use the High
Speed HDMI cables. Non-HDMI-compliant cables
cannot be utilized.
It is recommended that you use Panasonic’s
HDMI cable.
When outputting 24p signal, please use HDMI
Cables 5.0 meters or less.
When the unit is not to be used for a long
time
To save power, unplug it from the household
mains socket. This unit consumes a small
amount of power, even when the unit is in
standby mode.
[approx. 0.2 W (“Quick Start” is not activated
and “RF OUT ( Aerial Signal )” is set to “Off”)]
Connect the Set Top Box or video equipment
• Connect to terminals of the same colour.
Set Top Box or video equipment
Audio/Video cable
DMR-BWT450GL_eng.book 17 ページ ２０１５年２月５日 木曜日 午後３時２８分
To Next Page
Loading...
