Convenient functions
SQT0826
76
Basic Settings
Digital Audio Output
Dolby D / Dolby D + / Dolby TrueHD
DTS / DTS-HD
MPEG
Select the audio signal to output.
• Select “PCM” when the connected
equipment cannot decode the respective
audio format.
• Not making the proper settings may result in
noise.
BD-Video Secondary Audio
Turn on/off the clicking sound on the menu
and audio with secondary video.
Audio Delay
Mis-sync between the video and audio is
corrected by delaying the audio output.
Audio Type for Digital Broadcast
If the programme has more than one track (Dolby
Digital, etc.), you can set priorities.
• This setting will give effect in the following
conditions.
- The default setting when watching
broadcasts.
- The default setting when playing back the title
recorded in DR mode.
- File Conversion (> 45)
- Normal speed copy from the title recorded in
DR mode. (> 47)
Display
On-Screen Information
Select the time until the channel information
screen (> 24) disappears automatically.
Front Panel Display
Changes the brightness of the front panel display.
Screen Saver
This is to prevent image retention on the screen.
Teletext
Select the Teletext (> 25) display mode.
Connection
3D Settings
3D Type
If 3D video cannot be played back in 3D, you
may be able to play it in 3D by changing the
setting.
• Change the settings for 3D on the TV also
when “Side by side” is selected.
3D AVCHD Output
If 2D AVCHD video is recognised as 3D video
and cannot be played back correctly, you may
be able to play it by changing the setting.
3D Playback Message
Set to display or hide the 3D viewing warning
screen.
TV Aspect
Set to match the type of TV connected.
• Pan & Scan:
Side picture is trimmed for 16:9
picture.
The pictures may be shown in
the letterbox style depending on
the content.
• Letterbox:
Black bands appear for 16:9
picture.
DMR-BWT450GL_eng.book 76 ページ ２０１５年２月５日 木曜日 午後３時２８分
To Next Page
Loading...
