Watching broadcasts
SQT0826
26
Watching broadcasts
While pausing or rewinding a broadcast:
Press [STATUS ].
• Press [STATUS ] again.
While pausing a programme via external input:
Press [STATUS ] twice.
1 The time that you can rewind the live
programme.
2 The amount of time temporarily saved on
HDD.
3 The time of the current playback position.
To stop REWIND LIVE TV or PAUSE LIVE TV
1Press [STOP∫].
2 Select “Yes”, then press [OK].
To hide the display information
Press [EXIT ].
• The unit cannot rewind and play more than 1.5 hours prior
to the current time.
• Temporary save stops in the following cases:
- When switching to other channels or other screen
- When the unit has started recording using all tuners
- When performing PAUSE LIVE TV or REWIND LIVE TV
for more than 8 hours (This may vary depending on the
HDD free space.)
• These functions do not work in the following cases:
- When the clock is not set
- When all tuners are being used to record programmes
- While copying
- While watching a programme being recorded
- When a radio programme is selected
- REWIND LIVE TV:
When “REWIND LIVE TV” is set to “Off” (> 74)
- PAUSE LIVE TV:
When a timer recording via external input is started while
watching a programme via external input
Display information
Pause
8:05 AM
9:35 AM
8:50 AM
8:50:55 AM 01.01.2015
Play
8:50.50 AM
8:50:55 AM 01.01.2015
Play
8:50.50 AM
DMR-BWT450GL_eng.book 26 ページ ２０１５年２月５日 木曜日 午後３時２８分
To Next Page
Loading...
