19
RQT7305
Recording
Timer recording
[HDD] [RAM] [DVD-R]
You can perform timer recording easily by just marking the desired
program(s) in a television program list.
≥You can enter up to 8 days in advance.
≥The program name becomes the recorded title if the program is
listed on the television program list.
1 Press [TV GUIDE].
2 Press [3, 4, 2, 1] to select the
program.
≥To skip one screen
Press [PAGE X CH W].
≥To skip 24 hours in the list
Press [3, 4, 2, 1] to select “LISTINGS” and:
Press [CHAPTER] (Green) (forward).
Press [DUBBING] (Blue) (backward).
3 Press [CHAPTER] (Green).
“ ” appears in the list to indicate that the program is set for
timer recording.
≥Press [CHAPTER] (Green) to cancel.
≥Press [DUBBING] (Blue) to change recording frequency.
Each time you press the button:
Repeat steps 2–3 to program other recordings.
≥As long as the setting is not changed, the program is
recorded to the HDD in the recording mode selected by the
unit. To change the setting ➡ below.
∫ To change the setting
1Press [3] several times to select “LISTINGS”.
2Press [2, 1] to select “SCHEDULE”.
3Press [3, 4] to select the program and press
[ENTER].
4Change the setting as necessary and press
[ENTER].
≥To set recording to start early or end late
Press [3, 4] to select “Start early by” or “End late by” and
press the numbered buttons to enter minutes (up to 99).
≥To change the recording mode
Press [3, 4] to select “Quality” and press [DUBBING]
(Blue).
Each time you press the button:
≥To change the recording drive
Press [3, 4] to select “Destination” and press [DUBBING]
(Blue).
Each time you press the button:
HDD ,-. DVD
When the recording drive is “DVD” and there is not enough
remaining space, recording automatically switches to the
“HDD” (➡ page 21, Relief Recording).
4 Press [TV GUIDE].
Returns to the television screen.
≥The unit is not off. To save power, turn the unit off by
pressing [Í DVD POWER].
≥When using the cable TV box, make sure the cable TV box is
turned on.
To check, change or delete the program ➡ page 22
To utilize TV Guide On Screen system, see also page 23.
Notes on timer recording ➡ page 21
∫ To cancel recording when recording has already
begun
Press [∫], then [ENTER] within 5 seconds.
≥You can also press and hold [∫] on the main unit for more than 3
seconds to stop recording.
≥There may be some channels that are not displayed in the
television program list even if they are receivable. In this case set
them manually (➡ page 20).
Using the TV Guide On Screen system
to make timer recordings
[.
l
l
l
l
l
l
l
{
Records only once.
;
Records when the broadcast time and program
name match from Monday to Friday.
;
Records weekly.
;
Temporarily cancels the program timer
recording without deleting the program setting.
POWER
VOLUME
CH
INPUT SELECT
DVD POWER
TV
TV/VIDEO
1
HDD DVD
23
456
78
0
9
CM SKIP
AUDIO
PAG E
DRIVE SELECT
CH
CANCEL
VCR Plus+
SKIP
STOP
PAU SE
PLAY/x1.3
SLOW/SEARCH
FUNCTIONS
ENTER
DIRECT NAVIGATOR
TOP MENU
RETURN
SUB MENU
CHAPTER
SETUP
Info
PROG/CHECK
TV GUIDE
REC MODEERASE
REC
STATUS
TIME SLIP
DISPLAY
DUBBING
3 4 2 1
ENTER
CHAPTER
TV GUIDE
PAGE X CH W
DUBBING
∫
Í
DVD POWER
Numbered
buttons
TODAY
Last
Channel
SORTSCHEDULE
FAVORITES RECORD INFO.
87
NWGB
R
R
W
R
W
R
p
T
V
TV
NWBG
ducation
LISTINGS
8:30PM8:00PM
8:00 9:00
R
R
R
R
R
W
R
LP # EP # FR # XP # SP
^==============}
Start early by :
End late by :
Quality :
Destination :
00 minutes
00 minutes
SP
HDD
7305en.book 19 ページ ２００４年３月４日 木曜日 午後７時３９分
To Next Page
Loading...
