4. If you receive TV programming via cable TV, select, “Yes” using the UP/DOWN arrow
keys on the remote and press “ENTER.” If you use a roof top antenna, select “No”,
press the “ENTER” key and proceed to Step 11.
5. If your local cable company requires you to use a cable box select “Yes” using the UP/
DOWN arrow keys, press “ENTER” and proceed to the next step. If you are not required
to use a cable box, select “No” then press “ENTER” and proceed to Step 11.
6. If you’re using a cable box you’ll now be asked a series of questions that will set up the
IR Blaster. The IR Blaster is a device that will allow your DVD recorder to communicate
with your cable box. Press the “ENTER” key to continue.
4
To Next Page
Loading...
