Panasonic DMR-EA18K

43
Setting Menus
RQT9048
Off Timer
Select how long the unit remains on when it is not
being used.
Perform step 1 of “Accessing the Setup Menu” (➔ 42).
e
,
r
to select “Setup”, then
q
e
,
r
to select “Off Timer”, then
e
,
r
to select “2 Hours”, “6 Hours”
or “Off”, then
Remote Control
Use this function to synchronize the codes for the
remote control and the main unit.
Perform step 1 of “Accessing the Setup Menu” (➔ 42).
e
,
r
to select “Setup”, then
q
e
,
r
to select “Remote Control”,
then
e
,
r
to select “Set Code 1”, “Set
Code 2”, or “Set Code 3”, then
to set.
While pressing and holding ,
press and hold the numbered button
, , or corresponding to
the code set in step 4 for about 5
seconds to set.
to complete.
Clock Settings
Perform step 1 of “Accessing the Setup Menu” (➔ 42).
e
,
r
to select “Setup”, then
q
e
,
r
to select “Clock Settings”, then
Set Clock Manually
After selecting “Clock Settings” (➔ left, step 3).
e
,
r
to select “Set Clock Manually”,
then
w
,
q
to select the item you want to
change.
e
,
r
to change the setting.
Repeat steps 5-6 to change other items.–
to confirm new date and time
and to initiate the clock.
Set the time change dates for DST
Set the beginning and end dates for DST (➔ 12).
Quick Start
One Sec. Quick Start for Recording on DVD-RAM.
From the power off state, recording on DVD-RAM starts
about 1 second after first pressing [
^
DVD POWER]
and then sequentially pressing [
*
REC] (Quick Start
Mode). Power consumption is also higher when the unit
is turned off if this is set to “On”.
Perform step 1 of “Accessing the Setup Menu” (➔ 42).
e
,
r
to select “Setup”, then
q
e
,
r
to select “Quick Start”, then
e
,
r
to select “On” or “Off”, then
Restore Default Settings
This returns Setup menus to default settings, except for the
clock, ratings level, closed caption, and on-screen language.
Perform step 1 of “Accessing the Setup Menu” (➔ 42).
e
,
r
to select “Setup”, then
q
e
,
r
to select “Restore Default
Settings”, then
e
,
r
to select “Yes” or “No”, then